Audio Maiko Product Line
Our fully assembled modules & units.　

Preamp module.
2 channels on one board. Using Burr Brown best op amp for extending the frequency response and dynamic range of the whole system It worked as 2 mini-amp. US$100. Post paid.
Click picture for detail    
TR Power amp module
 50w class A. 70w class AB. By exploiting the linear gain portion of the Motorola power transistor to work under 'class A' operation, distortion is greatly reduced. US$ 100. Postpaid.
Click picture for detail    
LV Power supply module designed for TR power amp. 2 X 22,000 uF Nover cap., 45V max output.The IC- RC1237 provide system protection. Enhenced wiith high currrent rectiifier and relay contacts. US $70. Postpaid.
Click picture for detail    
HV Power Supply Module designed for MosFET power amp. max output 56V. 2x22,000 uF 65v audio cap. IC-RC1237 for system protection. Enhenced wiith high current rectifier and relay contacts. US$70. Postpaid.
Click picture for detail    
MosFET power amp module Using the American IC to drive the Japanese MosFET resulted with MHz bandwidth and very high slew Rate. JFET input buffer for isolation, stand alone volt regulators for IC driver. US$100. Postpaid.
Click picture for detail    

Maiko One (TR) unit complete with a pre-amp, 2 TR power amp & a LV power supply module. 2X50 W Class A operation. Include a 300 watt Xformer and full chassis accessories with nice front panel. US$800

Click picture for detail    

Maiko Two (MFET) unit complete with a pre-amp, 2 MosFET power amp and a HV power supply module. 2X100 W at MHz freq response. Included a 300 Watt Xformer, full chassis accessories, nice front panel. $800.

..

Each module or unit is instrument tested and listened. Detail circuit schematic, wiring diagram and test report are bundled with our products. Technical support is provided via phone call or E-Mail.